Category: TAP & DIE SETS

Posted on by

UT-TD67

67 PCS Tap & DIE Set

ITEM CODE: UT-TD67

DESCRIPTION:

  • 17 PCS Die sizes:
    • 3×0.5, 3×0.6, 4×0.7, 4×0.5, 5×0.8, 5×0.9, 6×1.0, 6×0.75, 7×1.0, 7×0.75, 8×1.25, 8×1.0, 10×1.5, 10×1.25, 12×1.75, 12×1.5, 1 / 8 – 28, 2 – 3×0.5, 2-3×0.6, 2-4×0.75, 2-5×0.8, 2-5×0.9, 2-6×1.0, 2-6×0.75, 2-7×1.0, 2-7×0.75, 2-8×1.25, 2-8×1.0, 2-10×1.5, 2-10×1.25, 2-12×1.75,  & 2-12×1.5, 2-1 / 8BSP28
  • 5 PCS HSS Drill
    • sizes: 2.5, 3.3, 4.2, 5.0, & 6.8
  •  5 PCS Screw Extractor
    • sizes: #1, #2, #3, #4, & #5
  • 1 PC Tap Handle
  • 1 PC Die Handle
  • 1 PC T-Type Tap Wrench
  • 1 PC Screw Pitch Gauge
  • 1 PC Screwdriver
  • 1 PC Center Punch
Posted on by

UT-TD52

52 pcs tap & die set

ITEM CODE: UT-TD52

DESCRIPTION:

  • 24 PCS Tap sizes: (3 Each) (1 x Rougher, 1 x Intermediate, & 1 x Finisher)
    • M3 x 0.5, M4x0.7, M5x0.8, M6x1.0, M8x1.25, M10x1.5, & M12x1.75 with 25mm
  • 12 PCS Die sizes:
    • M3 x 0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M10x1.5, & M12x1.75, with 25mm
  • 1 PC Tap Handle
  • 1 PC Die Handle
  • 1 PC T – Type Tap Wrench
  • 1 PC Screwdriver
  • 12 PCS HSS Drill sizes:
    • 2.5, 3.3, 4.2, 5, 6.8, 8.6, 10.3, 13/64, 17/64, 5/16, 3/8, & 27/64
Posted on by

UT-TD40

40 pcs Tap & die Set

ITEM CODE: UT-TD40

DESCRIPTION:

  • 17 PCS Die sizes (mm):
    • 3×0.5, 3×0.6, 4×0.7, 4×0.75, 5×0.8, 5×0.9, 6×1.0, 6×0.75, 7×1.0, 8×1.25, 8×1.0, 10×1.25, 10×1.5, 12×1.75, 12×1.5, & 1/8-27
  • 1 PC Tap Wrench American Pattern Size: 1/2″ Capacity
  • 1 PC T – Type Tap Wrench size: 1/4″ Capacity
  • 1 PC Screw Pitch Gauge
  • 1 PC Die Handle
  • 1 PC Screw Driver
Posted on by

UT-TD33

33 pcs tap & die set

ITEM CODE: UT-TD33

DESCRIPTION:

  • 7 PCS Die sizes:
    • 3×0.5, 4×0.7, 5×0.8, 6×1.0, 8×1.25, 10×1.5, & 12×1.75
  • 5 PCS UNF Die sizes:
    • 1/4, 5/16, 3/8, 7/16, 1/2, & 1″ O/D
  • 2 PCS BSP Die sizes:
    • 1/8″, 1/4″ – 1″ O/D
  • 14 PCS Taper Tap sizes:
    • 3×0.5, 4×0.7, 5×0.8, 6×1.0, 8×1.0, 8×1.25, 10×1.5, 12×1.75, 1/4, 5/16, 3/8, 7/16, 1/2 – 1″ O/D, 1/8″, 1/4″ – 1″ O/D
  • 1 PC Tap Wrench – American size: 1/2″ Capacity
  • 1 PC T – Type Tap Wrench size: 1/4″ Capacity
  • 1 PC Screw Pitch Gauge
  • 1 PC Die Handle size: 1″ O/D
  • 1 PC Screwdriver